Skeetendo

’Cause all games were better on the GBC

You are not logged in.

#1 2015-04-27 05:37:55

Pokemon_Master
Member
From: Eastern Kingdom of Mikado
Registered: 2013-05-18
Post 930/951
Website

No$GBA 2.8 relased! Now supports DSi emulation.

So while browsing the web for emulators i found this http://ngemu.com/threads/no-gba-v2-8-re … on.168697/
I found it useful so i'm gonna post it here:

nocash at NGEmu wrote:

The new
version is now
having real non-
experimental DSi
emulation. And it's more or less working
with DSi software.
So far, it's tested
with two DSi
cartridges, and two
DSiware programs: System Flaw (cartridge): Works, but the camera
emulation is
showing only a
dummy picture with
snow (which is
making the game unplayable, since it
misuses the camera
as gyro sensor). Cooking Coach (cartridge): Hangs for whatever reason.
It doesn't seem to be
related to DSi I/O
ports, so it might be
some more basic
problem, like some of the new/bigger
memory regions not
being properly
emulated yet, or
some memory not
being initialized as how the DSi
firmware would do
it) (running the
game in NDS mode
works, the problem
occurs only in DSi mode. DSi Browser (DSiware): Boots, but complains about
non-emulated WLAN
access point. Flipnote Studio (DSiware): Hangs for whatever reason,
might be the same
problem as with
cooking coach.
Would be great if
anybody figures out what is causing the
problems! http://
problemkaputt.de/
gba.htm DSi emulation
requires a copy of
the lower 32K-halves
of the ARM7/ARM9
BIOSes
(BIOSDSI7.ROM and BIOSDSI9.ROM). And
don't forget to
enable DSi emulation
(default is still set to
NDS mode, for better
compatibility with games like Cooking
Coach). PS. Some advice on
how to capture
camera pictures
under windows
would be nice! I need
something with good backwards
compatibility (which
would be probably
directshow), and it
should be something
that can be implemented by
plain source code
(without code from
external libraries). 02 Feb 2015 - version 2.8 - help: updated
gbatek standalone
version 2.8 (with
fairly complete dsi
specs)
- dsi: no$gba is now having (more or less)
working non-
experimental DSi
support
- dsi/cartloader:
auto-encrypts modcrypt area if
needed (requires
good sha1hmac)
- gba/snap: fixed
skipping empty-nds-
chunks in gba- snapshots (thanks
shiny.exe)
- newmem: avoids
borland tasm32/
tlink32 linker-error
on "arm_memxlat_non_
tcm"
- dsi/help: added list
of known regions/
countries (only
europe is known yet) - dsi/help: better
ndma description
(logical/physical
blocks, and repeat
modes)
- wifi/help: added new DSi access
points specs (wpa/
wpa2, and proxy
settings)
- wifi/help: added
formerly unknown NDS access points
specs (mtu, ssid
length)
- dsi/help: added
average microphone
specs for ARM7 side (A/D side is
unknown)
- dsi/emu: supports
fake camera access
(outputting some
dummy snow picture)
- dma: added
warning on
unsupported dma/
ndma types (wifi,sd/
mmc,aes,mic, mainmem)
- debug: fixed
$profiler_id indices
for dma-channel/
mode names
- dsi/emu: supports basic aes and sd/
mmc init (32bit
44xxh, 16bit
48xxh/49xxh)
- dsi/emu: supports
i2c access (8bit 450xh) and gpio
access (16bit 4C0xh)
- dsi/emu: supports
new touchscreen
controller (different
SPI protocol as NDS) - dsi/help: added
description for new
touchscreen
controller (position/
status)
- dsi/help: added notes on touchscreen
in nds mode (no
pressure &
temperature)
- dsi/help: identified
the dsi cameras as Aptina MT9V113
image sensors
- dsi/help: added
initialization/
transfer flowcharts
for cameras on ARM9 side
- dsi/help: added
initialization
flowchart for Aptina
cameras on ARM7 side
- dsi/help: added
initialization
flowchart for
Unknown cameras
on ARM7 side - dsi/help: added
undocumented
aptina regs, and
aptina REV3
additions
- dsi/help: added general dsi notes (eg.
dsi detection) and
info on exploits
- dsi/help: added
notes on basic
differences to NDS mode (changed
details)
- dsi/help: added info
about (mostly
unknown) eMMC
encryption (via CID register)
- dsi/help: added
behaviour of SPI
powerman (with
differences in DSi/
NDS modes) - gba/nds/dsi/help:
added BIOS RAM info (initial RAM content
and IRQ/SWI usage)
- nds/help: cart
header[06Eh] Secure
Area Delay, and
ROMCTRL.Bit28 gap CLKs
- nds/help: info on
rom chip id bit31
cart protocol variant
(gap/repeat/delay)
- xboo: supports dumping carts with
rom chip id bit31=1
(protocol differences)
- dsi/debug: added
tty.log options for
I2C commands and NDS cartridge
commands
- dsi/debug: prevents
warnings on bigger
New WRAM areas
(unlike 32K for NDS) - dsi/debug/emu:
allows bigger DSi7/
DSi9 bios regions
(bigger than NDS7/
NDS9)
- dsi/emu: allows reading/writing
more scfg registers
(as far as used by
games)
- dsi/emu: initializes
more scfg regs on reset (with
suspected/guessed
values)
- dsi/i2c/help: added
Aptina MT9V113
camera specs (i2c registers and
variables)
- dsi/i2c/help: added
many details on
bptwl chip (led/
volume/misc controller)
- dsi/help: described
power-button
modes (auto-reset,
irq, forced-power-
off) - dsi/help: major
corrections to I2C
control reg, added
I2C signals chapter
- dsi/help: added
details like headphone-connect
bit, game-cart-insert-
bit
- dsi/cartloader:
bugfixed cartloader
odd modcrypt lengths (eg. cooking
coach)
- dsi/help: added
GPIO specs (data in/
out/direction, irq
edge/enable) - dsi/help: removed
dsi cart protocol,
instead added
cmd_3Dh notes in ds
chapter
- dsi/help: hardware/ software info on
wiring the eMMC
chip to PC card readers
- dsi/help: info on sd/
mmc I/O (from
TC6387XB datasheet,
tmio_mmc, dsi
dumps) - dsi/help: added
specs for sd/mmc
protocols
(commands,
repsonses, registers)

Offline

Board footer

Powered by FluxBB